Black Water Tanks / Waste Water & Sanitation - Page 2 - Extreame Savings! Save up to 49%


Extreame Savings! Up to 49% off on Black Water Tanks (in Waste Water & Sanitation) at Johnson RV Sales, Page 2 [26]. Top brands include RecPro, Class A Customs, Custom Roto-Molding, SmartTote 2, Barker, OGOSPrill, Hlyjoon, Alpha Systems, LaSalle Bristol, ICON, & SmartTote2. Hurry! Limited time offers. Offers valid only while supplies last.



RecPro 44.5 Gallon Black Waste Water RV Holding Tank Left Side Drain 63" x 25" x 9 1/8" | Fitting Kit Included
By RecPro
In Stock
$209.95

mpn: RP-24637HL-KT, ean: 0193652002307,

4.0 out of 5 stars with 34 reviews
Details: Capacity - 44.5 Gallon Overall Basic Dimensions - 62.94'' x 24.948'' x 9.132'' Blow-molded Coupling 3 1/2'' ID (inside diameter) 4'' OD (outside diameter) Wall dimensions - 1/4''Capacity - 44.5 Gallon. Overall Basic Dimensions - 62.94'' x 24.948'' x 9.132''. Blow-molded. Coupling 3 1/2'' ID (inside diameter) 4'' OD (outside diameter).


Class A Customs 18.5 Gallon RV Waste Black Water Holding Tank WT-1850
By Class A Customs
In Stock
$74.99

mpn: WT-1850, ean: 7426933331265,

4.9 out of 5 stars with 35 reviews
18.5 Gallon Black / Waste Water Holding Tank Manufactured by Class A Customs Part# WT-18.50 Used for Human Waste or Gray Water - DO NOT USE FOR FRESH/DRINKING WATER MADE WITH Medium Density Polyethylene (MDPE) Resin SEAMLESS One piece seamless construction, no seams to burst RESISTANT Stain, Corrosion and Rust Resistant TANK MEASUREMENTS 34'' Length (not including pipe) x 16.50'' Width x 11'' Depth at largest point INSTALLATION & PLUMBING 3'' PVC Female Pipe Adapter DO NOT over-tighten fittings


Custom Roto-Molding H42 RV Holding Tank
By Custom Roto-Molding
In Stock
$114.46
$111.26
You Save: 3%

mpn: H42, ean: 0765053040600,

4.6 out of 5 stars with 41 reviews
*Made of high density polyethylene. *Requires use of hole saw for installation of grommets. *For 3'' fitting use a 3 7/8'' hole saw. *For 2'' fitting use a 2 3/4'' hole saw. *For 1 1/2'' fitting use a 2 1/4'' hole saw. *After grommet is seated in tank, upper lip must be sealed with silicone bathtub caulk. 21 Gallon Holding Tank MFG# H-42 H42 UPC# 765053040600


RecPro Universal RV Holding Tank Installation Fittings Kit
By RecPro
In Stock
$44.95

mpn: RP-VBKITH, ean: 0193652000341,

4.0 out of 5 stars with 27 reviews
Details: Three 1 1/2'' grommets One 3'' Grommet Three 1 1/2'' barbed coupler One 3'' barbed coupler 6 Mini-Probe Tank Inserts (sensors)Three 1 1/2'' grommets. One 3'' Grommet. Three 1 1/2'' barbed coupler. 6 Mini-Probe Tank Inserts (sensors).


Thetford SmartTote2 Portable RV Waste Tote Tank 40501, 2 Wheels - 18 Gallon Capacity
By SmartTote 2
In Stock
$111.90
$110.79

mpn: 40501, ean: 0700360045313,

4.3 out of 5 stars with 46 reviews
Rugged 18 gallons tote, made of polypropylene, designed to empty the holding tanks without the need of driving the RV to the dumping station. SmartTote2 18 gallons comes with two rubber wheels and a built-in handle, for an easy transport from the RV to the dumping station. The retractable discharge hose with cap is held in securely during transport and storage with a retainer strap. The AutoStopTM level gauge helps in both preventing overspills, and ventilates the tote for a faster emptying pro


Barker (27844) 4-Wheeler Tote Tank - 32 Gallon Capacity
By Barker
In Stock
$424.99
$217.67
You Save: 49%

mpn: 27844, ean: 0700115532563,

4.1 out of 5 stars with 17 reviews
TOTE-ALONG 4-WHEELERS - The ''tow on the ground'' 4-Wheelers are equipped with standard 3 Inch valves to eliminate lifting to ''dump'' tanks. 4-Wheelers are available in 16, 25, 32 and 42 Gallon sizes for compatibility with any size RV. Constructed of blow molded polyethylene, zinc plated steel and aluminum. Double wheel, front-swivel design for easy pulling and maneuvering. Each 4-Wheeler Tote-Along is completely assembled and includes bayonet fittings, 5 Feet sewer hose, and tow handle. 32- Ga


HHO Water Tank
By OGOSPrill
In Stock
$24.99

mpn: WaterTank01, ean: 0116000291642,

4.7 out of 5 stars with 36 reviews
* Three 3/8'''' NPT x 1/4'''' Tube ID * Tight fitting screw cap-non vented - Not the cheap snap-on lid type that leaks HHO gas and sucks atmosphere air * 1.5 Quart Tank measures 4.33'' x 5.52'' x 3.75'' * Tank Comes with (3) 1/4'''' Barbed fittings. * Tight-fitting, non-vented filler cap & heavy duty molded side mounting ears * Connects to HHO dry cell fittings * Tank is guaranteed not to leak * Allows the water to circulate in the generator through the tank, makes for a cooling runnning system


Hlyjoon Car Auxiliary Water Tank Heat Dissipation Kettle Modification Replacement Universal
By Hlyjoon
In Stock
$40.99

mpn: Hlyjoonreofsba427, ean: 0705989133335,

4.2 out of 5 stars with 34 reviews
Features: Quality heat dissipation tank, helps to enhance the performance of engine. Accelerate heat dissipation in the water tank, pressurize and eliminate air bubbles in the water. Made of premium quality aluminum alloy material, rustproof, long service life. Professional manufacturing, stable performance, and good reliability and sealing performance. 1.2L large capacity, and easy to clean and maintain, suitable for most types of car. Specification: Condition: 100% Brand New Item Type: Aux


Alpha Systems (VB24637HR 24" x 63" x 7" Holding Tank
By Alpha Systems
In Stock
$111.75

mpn: VB24637HR, ean: 0846732050414,

4.4 out of 5 stars with 36 reviews
ALPHA SYSTEM HOLDING TANK - Alpha's revolutionary blow molded holding tanks are the most reliable in the industry. The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties. Alpha Systems blow-molded HDPE tanks are an integral component to all recreational vehicles. These RV holding tanks (waste water) have standard configurations with the option to customize fittings. Alpha Systems backs all of the tanks with a 12-month war


LaSalle Bristol 210SLE313R Holding Tank Heat Pad
By LaSalle Bristol
In Stock
$28.91
$28.04
You Save: 3%

mpn: 210SLE313R, ean: 8103389113704,

4.1 out of 5 stars with 50 reviews
Ampere Rating: 0.55 Amp Compatibility: Prevent Freeze-Ups In Holding Tanks/ Pipes/ Steps And 3 Inch Elbow Length (IN): 13 Inch Mounting Type: Peel And Stick Temperature Rating (Deg F): 45 Degree Fahrenheit ON/ 67 Degree Fahrenheit Off Voltage Rating: 13.5 Volt Width (IN): 3 InchHolding Tank Heater; Use To Prevent Freeze-Ups In Holding Tanks/ Pipes/ Steps And 3 Inch Elbow; Heats Up To 40 Gallons Capacity Tank; Thermostatically Controlled; 45 Degree Fahrenheit ON/ 67 Degree Fahrenheit Off; 3 Inch


ICON 00447 Center End Drain Holding Tank-16.5" x 46.5" x 8"
By ICON
In Stock
$175.92
$172.94
You Save: 2%

mpn: 00447, ean: 0628423004476,

4.8 out of 5 stars with 56 reviews
Constructed of tough ABS plastic for long service life. All seams are solvent welded and have a 1-1/4'' mounting flange. Dimensions are 16. 5'' x 46. 5'' x 8'' - with a 15 US Gallon Capacity.Tank Length - 46. 5. Tank Height - 8. Tank Litres - 57. Capacity: US Gallon - 15. Tank Width - 16. 5.


RecPro 50 Gallon RV Holding Tank 53" x 27" x 10 1/2" | Waste Water Tank | RV Waste Water Tank | RV Water Holding Tank
By RecPro
In Stock
$234.95

mpn: RP-4418, ean: 0193652006459,

4.0 out of 5 stars with 19 reviews
Details: Capacity - 50*- gallons Dimensions - 53'' L Dimensions - 27'' W Dimensions - 10 1/2'' D Dimensions - 1/4'' T (wall) Black water specific High-density plastic Color - black Elkhart Plastics, Inc manufactured Virtually free of inclusions and impurities *52 - gallon actual capacity*This holding tank, while classified as a 50-gallon capacity tank, is mold-crafted to hold two more gallons of black water than other models in this class. The reason for the extra capacity is the rotational mold


ICON 12378 Holding Tank
By ICON
In Stock
$347.38
$346.61

mpn: 12378, ean: 0628423123788,

4.2 out of 5 stars with 8 reviews
58'' x 28'' x 8 1/2'' - 43 US Gallon Capacity.58'' x 28'' x 8 1/2'' - 43 US Gallon Capacity.. 3'' Drain fitting preinstalled. 4 level sensors preinstalled.


Icon 437 22-1/2" x 18-1/2" x 6" Bottom Drain Holding Tank
By ICON
In Stock
$135.44
$131.98
You Save: 3%

mpn: 00437, ean: 0628423004377,

4.0 out of 5 stars with 34 reviews
This tank has reinforcements built right in so you can mount a toilet directly on top of it. The holding tank comes with a 3'' Threaded Fitting, a 2'' Slip Fitting and a 3''ID /7''OD Flange Fitting. No additional fittings are needed. All seams are solvent welded and have a 1-1/4'' mounting flange. Dimensions of holding tank are 18. 5'' x 22. 5'' x 6'' - 8 US Gallon Capacity.3 inch threaded fitting. 2 inch slip fitting. No additional fittings are required. All seams are solvent welded.


RecPro 45 Gallon Black Waste Water RV Holding Tank with Sensors 54" x 32" x 7" | Fitting Kit Included
By RecPro
In Stock
$224.95

mpn: RP-32547H-KT, ean: 0193652002505,

4.3 out of 5 stars with 36 reviews
Color: Black Capacity: 45 gallons Durable high-density plastic walls Low-profile Front-facing port Length: 54'' Width: 32'' Depth: 7'' Front lip depth: 3'' Port: 4'' OD and 3.75'' ID Multiple depth sensorsCapacity: 45 gallons. Durable high-density plastic walls. Low-profile. Front-facing port.


RecPro RV 45 Gallon Black Waste Water Holding Tank with Fill Sensors for Campers, Trailers and RV's 54"L x 32"W x 7"D
By RecPro
In Stock
$184.95

mpn: RP-32547H, ean: 0695924658958,

4.5 out of 5 stars with 42 reviews
The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties. Blow-molded HDPE tanks are an integral component to all recreational vehicles. Built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association. Length: 54'' Width: 32'' Depth: 7''The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and therm


ICON 12369 Holding Tank
By ICON
In Stock
$339.25
$267.31
You Save: 21%

mpn: 12369, ean: 0628423123696,

4.6 out of 5 stars with 28 reviews
48'' x 24'' x 9'' - 25 US Gallon Capacity.48'' x 24'' x 9'' - 25 US Gallon Capacity.. 3'' Drain fitting preinstalled. 4 level sensors preinstalled.


44.5 Gallon RV Black Waste Water Holding Tank 63" x 25" x 9 1/8" | Campers, Trailers and RV's
By RecPro
In Stock
$179.95

mpn: RP-24637HL, ean: 0606345305611,

4.5 out of 5 stars with 43 reviews
The uniform thickness of the tanks makes them much more durable than the traditional rotational molded and thermoformed varieties. Blow-molded HDPE tanks are an integral component to all recreational vehicles. Built to standards specified by IAPMO (International Association of Plumbing and Mechanical Officials) and the Canadian Standards Association. 25 Width x 63 Length x 9.132 Height Holding Tank 44.5 Gallon, Blow-molded with 3 Inch CouplingThe uniform thickness of the tanks makes them much mo


Icon 12060 Drain
By ICON
In Stock
$256.10
$203.65
You Save: 20%

mpn: 12060, ean: 0628423120602,

4.7 out of 5 stars with 8 reviews
22 1/8'' x 53 3/4'' x 9'' - 29 US Gallon Capacity.22 1/8'' x 53 3/4'' x 9'' - 29 US Gallon Capacity.. Molded of High impact ABS. 3'' Drain fitting preinstalled. 4 level sensors preinstalled.


SmartTote2 RV Portable Waste Tote Tank - 4 Wheels - 35 Gallon - Thetford 40519
By SmartTote2
In Stock
$251.85
$248.36
You Save: 1%

mpn: 40519, ean: 1307803100104,

4.6 out of 5 stars with 9 reviews
Generous 35 gallons portable tote, the SmartTote2 LX is the ready-to-use system, right out of the box. No assembly is necessary – just remove from the box, attach the bayonet to the sewer outlet and start emptying the holding tanks. The tote is made of rugged polypropylene and comes with 4 rubber wheels. The front wheels are connected directly to the extendable handle, which can be hooked onto a trailer hitch and transported to the dumping station. SmartTote2 LX was designed to be easily store



Viewing Page 2 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - johnsonrvsales.com. All Rights Reserved.